Polk Audio RMDS-1 User Manual download pdf (Page 15)

www.polkaudio.com

Wall Mounting The Satellites

The satellite speakers are supplied with wall mounting brackets.

Follow the steps below to safely secure the brackets and speakers.

On-wall installation of RM satellites requires basic skills in using tools

such as a drill and screwdriver. If you are in doubt that you possess

the necessary skills or tools, consult your Polk dealer or a

professional installer.

• Make sure the locations you select do not conceal electrical

wiring or plumbing.

• Hold the speaker in the chosen location to make sure it clears the

ceiling, adjacent walls, corners, beams, lighting fixtures and door/

window frames.

• Use a bracket as a template to mark the location of the two key-hole

slots with a pencil.

• If you are certain that there is a stud behind the wall surface, drive

#10 screws (not supplied) through the wall and into the stud leaving

screw heads protruding 1/16”.

• If there is no stud behind the chosen location, install #10 wall

anchors (not supplied) into the wall by following wall anchor

manufacturer’s instructions, leaving screw heads protruding 1/16.”

Always use two wall anchors and screws per speaker.

• Attach the bracket to the satellite with the supplied screw as shown.

The angle of the bracket allows you to point the speaker toward your

listening position. Turn the bracket to get the angle you want and

tighten the screw.

• Line up speaker so that screw heads pass through the large center

holes of the keyhole slots. Let speaker slide straight down, allowing

screw heads to slip behind the smaller end of the keyhole slots.

• If the supplied wall mount brackets do not allow the mounting angle

that meets your needs, or if you wish to ceiling-mount the satellites,

use optional, fully articulating “ball and socket” mounting

brackets, such as those made by Omnimount.

Center Channel Wall Or Ceiling Mounting

Use an optional, fully articulating “ball and socket” mounting bracket,

such as those made by Omnimount.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 31 32

No comments

Polk Audio RMDS-1 User Manual Page 15